Click "View Instructions" to see the online version. Click "Download Instructions" to download a PDF version to your computer. This page contains only the instructions. Enter Project 12 to download the actual templates or installers. Adobe Acrobat Reader (full version recommended) A printer (color recommended) Please read the following REQUIREMENTS before using this template: Minimum Software Requirement: Adobe Acrobat Reader 5 or higher This allows full customization, but DOES NOT allow the customized templates to be saved for later use. This will make supplying a finished template to an outside vendor (such as a printer) impossible. You may ONLY use logos saved in the PDF format. Recommended Software: Adobe Acrobat 5 or higher (full version) This allows full customization, including the saving of customized templates. You may use any of the following formats for your custom logos: PDF, BMP, GIF, JPG, PCX, PCT, PNG, or TIF. In order to fully customize this template you will need to have the following content ready: Your Library Name Your Library Address Your Library Website Address (URL) Your Library Phone Number Your Library Logo (see requirements to the left) STEP 1: LOCATE YOUR LOGO FILE Make sure you have your Library Logo saved to your computer's hard drive first. Many logos are available to download in PDF format from the Project 12 website. Note: If you are using the free Acrobat 5 Reader application then the logo must be in PDF format. (see the HELP area of the Project 12 website for more information on file formats) If you are using the full Acrobat 5 Application you may use any of the following formats: PDF, BMP, GIF, JPG, PCX, PCT, PNG, or TIF. STEP 2: DOWNLOAD AND OPEN THE TEMPLATE Now that you have your logo ready it's time to download and open the template. You can click the link on the Project 12 website to download this template or if you've alread saved the template to your computer's hard drive, you may open it from there. STEP 3: CUSTOMIZE YOUR TEMPLATE Once your template is open in Acrobat 5 you can begin to customize the content to match your library. a. To customize the text fields simply click the desired text area and type in the proper information. b. To customize the logo, click the area that says "Click here to add your library logo." You will then be prompted to choose your logo file. Click "Browse" and select the desired logo file from your computer's hard drive. Note: If you are using the free Acrobat 5 Reader application then the logo must be in PDF format. (see the HELP area of the Project 12 website for more information on file formats) If you are using the full Acrobat 5 Application you may use any of the following formats: PDF, BMP, GIF, JPG, PCX, PCT, PNG, or TIF. STEP 4: PRINT YOUR CUSTOMIZED TEMPLATE Your template is ready to print at this point. Simply choose PRINT from the FILE menu or click the printer icon from the Acrobat 5 application. You are now ready to trim them out using the crop marks included on the front as your guides. STEP 5: Assembly This template contains one panel for a table tent. You can create a table tent with three or four panels. The panels can all be the same or you can download templates from the other services offered on the Project 12 website. After you have all of you panels printed and trimmed, simply tape them together. We recommending placing the tape on the back sides only.